401-943-1164 / US & Canada Toll Free: 877-943-1164

Model 7242S DB25 A/B Switch with 10-Base-T Secure Setup, Remote Access

June 4, 2008



Electro Standards Laboratories announces its Model 7242S Single Channel, IP Addressable, RS232/RS530 DB25 A/B Data Network Switch. This network switch provides one channel switching in a low profile, 19” 1U rack unit.  The Model 7242S network switch enables sharing a single DB25 interface device connected to the COMMON port among two other devices connected to the A and B ports. Switch Setup/Configuration access is secured by password protection.

This network switch is controlled manually via a front-panel pushbutton. Password protected remote switching is via the 10-Base-T RJ45 rear-panel control port. This control interface has an IP address and listens on the standard TELNET port (23) for incoming connection. A front-panel LED indicates switch position, power status, and network status. All 25 pins of the DB25 interface are switched. The Model 7242S network switch maintains position and continues to pass data during power loss.   For details on the Model 7242S DB25 A/B Data Network Switch, click here:  http://www.electrostandards.com/ProductDetail/?productid=216

For more information about the Model 7242S and other Electro Standards network switches, please call 401-943-1164, email eslab@ElectroStandards.com, or visit our website http://www.electrostandards.com.

Electro Standards Laboratories
36 Western Industrial Drive
Cranston, RI 02921 USA
Tel: 401-943-1164
Fax: 401-946-5790
Email: eslab@ElectroStandards.com