M4404 Remote Power Reboot Switch with 10-BASE-T LAN/WAN Access

FOR IMMEDIATE RELEASE

 Electro Standards introduces its Model 4404 Remote Power Reboot Switch with 10-BASE-T LAN/WAN Access. This Power Reboot Switch enables the user to cycle power to eight remotely located devices. Equipment prone to lock up problems is plugged into the Model 4404’s AC power outlets. The authorized user remotely restarts the connected units by accessing the Model 4404 via a 10-Base-T connection. By simply entering the IP address of the Power Reboot Switch into a Web browser, a graphical representation of the switch can be accessed. The user selects any of eight AC outlets individually, or in groups, and removes and restores power. This allows the connected equipment to re-initiate and resume operation.

No special software is required. The system is secure with username and password authentication required. User privilege level configuration creates users with different authorities. The IP Addressable feature gives authorized users across the LAN or over the Internet access to control the switch.  For details, click here: http://www.electrostandards.com/ProductDetail/?productid=260

For further information on Electro Standards’ data switches, call 401-943-1164, email eslab@ElectroStandards.com, or visit us on the web at www.ElectroStandards.com.

Tina Corticelli, Media Manager

Electro Standards Laboratories

36 Western Industrial Drive

Cranston, RI 02921

Tel: 401-943-1164

Fax: 401-946-5790

Email: eslab@ElectroStandards.com